SMD Steve Meade Designs

SMD Distortion Detector DD-1 *B-STOCK*

SKU:
SMDDD1BS
Condition:
New
Availability:
Usually ships in 24 hours.
  • SMD DD-1 Distrotion Detector - Steve Meade Designs
  • SMD DD-1 Distrotion Detector - Steve Meade Designs
  • SMD DD-1 Distrotion Detector - Steve Meade Designs
  • SMD DD-1 Distrotion Detector - Steve Meade Designs
  • SMD DD-1 Distrotion Detector - Steve Meade Designs
MSRP: $207.99
$166.24
— You save $41.75

Out of stock

Description

The SMD Distortion Detector DD-1 *B-STOCK* is a precision tool designed to help installers set the gain of an audio amplifier to match the output level of the source unit accurately and quickly. This used product has undergone thorough checks and testing to ensure its functionality before being made available in stock.

Included in this package are the DD-1 device itself, a manual for easy reference, a test tone CD (downloads also available), and a DD-1 harness for easy connection. With these items, you have everything you need to enhance your audio setup.

One of the primary purposes of the Distortion Detector is to enable users to identify and address any distortion in the audio signal that may arise from poorly designed or malfunctioning audio equipment. By having this tool, you can ensure that your audio system performs optimally, providing you with clear and high-quality sound reproduction.

The DD-1 is designed to be a precision piece of equipment that can provide years of reliable service when properly treated and maintained. It is powered by a 9V battery, which is easily accessible and allows for isolation from the vehicle's electrical system. This ensures that the DD-1 accurately measures the audio signal without interference from the charging system's noise.

For easy connectivity, the DD-1 features an RCA input connector. This allows users to directly measure the output of a headunit if desired. Additionally, the harness can be easily replaced or repaired in the field, providing convenience and flexibility.

In terms of specifications, the Distortion Detector's circuitry is 100% analog, guaranteeing accurate measurements. It can detect distortion trigger levels above 1.0% Harmonic Distortion and has an operating range of input signal from 1.2Vrms to 125Vrms (equivalent to 15,000 Watts at 1 ohm). The signal present LED trigger voltage is 750mVrms, while the low battery LED trigger voltage is below 5.6Vdc. The auto-shut off timer ensures power conservation by turning off the device after 8-10 minutes of inactivity.

For more detailed information on using the SMD Distortion Detector DD-1, you can refer to the product manual available at the provided link. Take advantage of this reliable tool to fine-tune your audio system and enjoy crystal-clear sound with minimal distortion.
View AllClose